Healthy Products, Healthy Pets
Cart 0
Rescued Dogs Rock Magnet

BPaWed Pals, LLC

Rescued Dogs Rock Magnet

$ 6.00

Instructions for magnet use:

Preparing Magnetic-Receptive Surfaces
• Before affixing magnetic sheet to a metal surface, be sure all surface paints, clear 
coats and waxes are cured (hardened).*
• Clean the metallic surface and the magnet with mild detergent.
• Wipe with a soft cloth or allow to dry.
*(Approximate curing times: paint 90 days; clear coat 60 days; wax 2 days.)

Applying Flexible Magnets
• If possible, affix to smooth, flat or gently curved metallic surfaces.
• Make sure the entire magnet is flat against the metal surface (i.e. no air pockets).
• If you place the magnet in the wrong position, completely remove the magnet from 
the surface and re-affix. Do not pull the magnet across the surface or it may stretch 
due to resistance caused by the high magnetic strength.
• Avoid use on horizontal metal surfaces exposed to direct sunlight (such as 
automobile hoods) or temperatures exceeding 150o F (66o C).
• Be aware that long-term use on surfaces frequently exposed to sunlight (such as 
vehicles) can result in uneven fading of the surface because the magnet-covered 
area is shielded from ultraviolet rays.

Cleaning Flexible Magnets
• To guard against moisture and dirt buildup between the magnet and the metal 
surface (particularly on outdoor applications), remove the magnet at regular 
intervals. Clean both the magnet and metal surface with mild detergent; wipe with a 
soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean WEEKLY.)
• To protect fresh clear coat, base coat and/or vinyl surfaces on new cars and trucks, 
remove magnetic signs DAILY.

Share this Product


More from this collection